Openbox and Skybox CCcam Setup

ATTACH BOX TO POWER CABLE, SATELLITE CABLE, HDMI CABLE AND NETWORK CABLE


CLINE SETUP

1: Go into the main menu
2: Select Network, enable your network and set the IP address to DHCP. Go back to network.
3: Select "CCcam Client Setup" If you can not see CCcam setup in the menu jump to number 9
4: If you have a cccam.cfg on your usb, we provide the CCcam.cfg file, ask for the full configured file from us to get all of our channels. Copy the CCcam.cfg file into the root folder from your USB stick. Do not copy the file in a specific folder.Select 'Update files by usb' if not, jump to number 10
5: On new window, highlight 'CCcam.cfg', press green button on remote (ADD). This will place a tick by it, the press yellow button on remote (READ)
6: Once finished, select 'Manage Config Files' and on new window select cccam.cfg again
7: A new page comes up with your cline on it, press green button on remote to make it active (tick should appear by it) Exit out of all menus to tv and select a pay channel.. it should clear, if not go back into menu, select Network, then 'Network Setup', and turn DHCP 'off' by using arrow keys and then hitting apply.
8: if channel still doesnt clear, reboot box and router by unplugging both from power and plugging back in (router first)

9: if you cant see this option go to network and press 6666 this should bring up hiden menu or 8888


10: for those who didnt create a cccam.cfg on their usb, you can add it manually..


a] instead of update by usb on ccccam client setup, go directly to Manage Config Files and select CCcam.cfg from new window
b] Press Blue button on remote
c] your cline will look something like this>>> C: example.cccamservice.com 12000 user pass
d] ON add cline window, leave Protocol as CCcam
e] Host: here you would enter example.cccamservice.com portion of your cline using remote number buttons like you was sending a text
f] Port: here you put 12000
g] User, write 'user' here
f: Password, write 'pass' here
g] Press ok and go up to instruction number 7 OF CLINE SETUP

Was this answer helpful?

 Print this Article

Also Read

How to Install Dreambox Control Center

Most of users are looking for a simple way to manage their receiver boxes via a flexible and well...

How to Make CCcam.cfg file

Most of the satellite receiver boxes need CCcam.cfg file with your CCcam lines in it in order to...

How to Setup CCcam on Technomate

To install cccam on technomate boxes, Simple procedure has to be followed. First start up your...

Spiderbox CCcam Setup

How to CCcam Setup for a Spiderbox via USB or remote controlWhat do you need?1. USB Stick2. Valid...

Ariva 150 CCcam Setup

DO NOT load any channel file from any other receiever as it will brick you box, only files for...