How to Setup CCcam on Technomate

To install cccam on technomate boxes, Simple procedure has to be followed.

 

First start up your box. Now follow these steps:

-Press and hold the power button on your box front panel as it starts up

-A number will appear in your front display and thats what your box IP Address ends in.

Note: For example if the number is 5, then your box Ip Address is 192.168.2.5

-Now with a web browser you need to connect to that IP by typing it in the browser.

Note: Remember your PC/Laptop must be on the same IP range 192.168.2.xxx

-On bottom right of this page you`ll see "CCcam Edit" under the menu Edit Email Config. Press "Click"

 -If it requests for password, type and proceed

-Finally a field will appear with a button beside it called "Add Line"

-Remember the line format you should enter is like this: C: server port user pass

 

This was the standard procedure for installing CCcam on technomate boxes.

Was dit antwoord nuttig?

 Print dit artikel

Lees ook

Skybox F5 CCcam Setup

Format USB to FAT32 (on your pc)Turn on F5, let it boot up and put USB in the backUsing remote...

Spiderbox CCcam Setup

How to CCcam Setup for a Spiderbox via USB or remote controlWhat do you need?1. USB Stick2. Valid...

Engel RS 4800 Y CCcam Setup

1- Open notepad on pc.2- Enter your cccam lines 3- Save the file as CCcam_Newcamd.cfg4- Put the...

vu+ solo4k

Download link-oscam, are in etc/tuxbox/config/oscamConfig(replace user pass with your own on...

How to set cccam in Iris 9900 HD

In this tutorial I will try to explain briefly how to configure cccam in 9900 Iris HD decoders,...