How to Setup CCcam on Technomate
To install cccam on technomate boxes, Simple procedure has to be followed.
First start up your box. Now follow these steps:
-Press and hold the power button on your box front panel as it starts up
-A number will appear in your front display and thats what your box IP Address ends in.
Note: For example if the number is 5, then your box Ip Address is 192.168.2.5
-Now with a web browser you need to connect to that IP by typing it in the browser.
Note: Remember your PC/Laptop must be on the same IP range 192.168.2.xxx
-On bottom right of this page you`ll see "CCcam Edit" under the menu Edit Email Config. Press "Click"
-If it requests for password, type and proceed
-Finally a field will appear with a button beside it called "Add Line"
-Remember the line format you should enter is like this: C: server port user pass
This was the standard procedure for installing CCcam on technomate boxes.
Дали Ви помогна овој одговор?
Исто така прочитајте
For transferring the CCcam.cfg file into your VU+ SOLO or DUO, you need to use a FTP client. we...
ATTACH BOX TO POWER CABLE, SATELLITE CABLE, HDMI CABLE AND NETWORK CABLECLINE SETUP1: Go into the...
Most of the satellite receiver boxes need CCcam.cfg file with your CCcam lines in it in order to...
Download link-oscam, are in etc/tuxbox/config/oscamConfig(replace user pass with your own on...
DO NOT load any channel file from any other receiever as it will brick you box, only files for...