How to Setup CCcam on Technomate
To install cccam on technomate boxes, Simple procedure has to be followed.
First start up your box. Now follow these steps:
-Press and hold the power button on your box front panel as it starts up
-A number will appear in your front display and thats what your box IP Address ends in.
Note: For example if the number is 5, then your box Ip Address is 192.168.2.5
-Now with a web browser you need to connect to that IP by typing it in the browser.
Note: Remember your PC/Laptop must be on the same IP range 192.168.2.xxx
-On bottom right of this page you`ll see "CCcam Edit" under the menu Edit Email Config. Press "Click"
-If it requests for password, type and proceed
-Finally a field will appear with a button beside it called "Add Line"
-Remember the line format you should enter is like this: C: server port user pass
This was the standard procedure for installing CCcam on technomate boxes.
Esta resposta foi útil?
Most of the satellite receiver boxes need CCcam.cfg file with your CCcam lines in it in order to...
1- Open notepad on pc.2- Enter your cccam lines 3- Save the file as CCcam_Newcamd.cfg4- Put the...
1. Stick on a clone safe image2. Do your basic setup/ forget the channel scan say you will di it...
Format USB to FAT32 (on your pc)Turn on F5, let it boot up and put USB in the backUsing remote...
Most of users are looking for a simple way to manage their receiver boxes via a flexible and well...